20
MANUAL P/N 900000111 REV K
4
Configuration
Please note that the unit will automatically reboot when a serious error or lock up occurs. This allows
the unit to reset and run instead of locking up.
4.1
Setup
The Setup tab consists of two sections, the System and IP Address. This tab allows you to modify
setup information for the NFS-220. Please note that a Class C Network is being used therefore valid
IP addresses are between 192.0.0.0 to 223.255.255.0. To save all modifications made to the Setup
screen, click the Submit button. To undo all modifications made to the Setup screen, click the Reset
button.
Figure 5: Setup
4.1.1
System
The System section consists of two fields, the Version and Unit Location. The Version refers to the
version number of the firmware. The Unit Location refers to the location of the unit. A maximum of
127 characters may be entered in the Unit Location field. Entering apostrophes (‘) in the Unit
Location field is not recommended.
