11
e n g l i s h
Instruction Manual
Very important: Read this manual thoroughly before using the hob.
This manual is designed so that the texts relate to the corresponding illustrations.
Note:
You can download a copy of the manual on the following web page
www.brandt.com
Safety
• The mains circuit to which the hob is connected must have a
omnipolar cut-off switch with a contact opening distance of at
least 3 mm.
• The appliance must be installed by an authorised installer who will
follow the manufacturer’s instructions and diagrams.
• The electrical installation must be suitably dimensioned for the
maximum power indicated on the reference plate and the plug
must have the regulatory earth connection.
• If the power cord is damaged, it should be replaced by the
manufacturer or by your after-sales service or similar qualifi ed
personnel to prevent possible hazards.
•
WARNING:
If the glass surface cracks or breaks, disconnect it
from the mains immediately to prevent a possible electric shock.
Do not use the hob until the glass has been replaced. It should be
replaced by the after-sales service or by qualifi ed personnel (4.1.1)
• Do not place hot pots and pans on the sensors. You may damage
the electronic circuit (4.1.3)
•
WARNING:
The appliance and its accessible parts may get hot
when it is operating. Be careful not to touch the heating elements.
Children under the age of 8 must not go near the appliance unless
under permanent supervision.
Important
Keep this manual with the appliance. If you sell or give the
appliance to another person, make sure you also pass on the user
manual. Read these instructions carefully using and installing the
appliance. They are designed to protect your own and others’
safety.
Summary of Contents for TV1200B
Page 38: ......
