64
EN
6 / EVERYDAY MAINTENANCE OF YOUR APPLIANCE
•Upkeep of internal parts
To ensure better hygiene we recommend the
following:
— Leave the lid open for a while after washing.
— Clean the plastic and rubber parts around
the cavity access around once a month using
a product with low bleach content. Rinse to
eliminate all residue from this product.
— Run a 90°C wash cycle at least once a
month.
•Periodic checks
We recommend that you check the condition
of water supply and emptying hoses. If you
observe the slightest cracking, do not hesi-
tate to replace them with identical hoses avai-
lable from the manufacturer or its After-Sales
Service.
•Replacement of the water supply
hose
When changing it, ensure it is well tightened
and that there is a seal at both ends.
•Replacement of the power cord
Important:
To ensure your safety, this must be car-
ried out by the manufacturer's after-sales
service team or a qualified professional.
•Risk of freezing
If there is a risk of freezing, disconnect the
water supply hose and empty the water that
may be left in the emptying hose, placing the
hose as low as possible in a cup.
• MISCELLANEOUS MAINTENANCE
