42
EN
• REMOVING THE TRANSPORT BRACES
2 / INSTALLING YOUR APPLIANCE
Fig. 04
Fig. 05
B
A
Fig. 06
B
Fig. 07
C
Important:
Before use, the following operations
must be performed.
These operations involve removing all parts
used to immobilise the tank of your appliance
during transport.
These "brace removal" operations are
necessary for the smooth operation of your
appliance and compliance with current
safety standards.
If these operations are not performed in full,
this may cause serious damage to your
appliance during operation.
First remove the expanded polystyrene strut
located under the lid.
•
Front transport brace:
— Open by pressing on the bosses on each
side of the
baseboard
at the same time
while pulling the baseboard towards you
(Fig.
04).
— Using a 10 mm wrench, unscrew the
"front"
brace
maintenance screw
made from red
plastic
(Fig. 05).
— Remove the
"front" brace
(Fig. 06).
— Plug the hole left by the brace using the
cover
provided
(Fig. 07).
— Reattach the baseboard
(Fig. 07).
C
A
B
