21
A layer of frost occurs in
the compartment
Check that the air outlets are not blocked by food
and ensure food is placed within the appliance to
allow sufficient ventilation. Ensure that door is fully
closed. To remove the frost, please refer to cleaning
and care chapter.
Temperature inside is too
warm
You may have left the doors open too long or too
frequently; or the doors are kept open by some
obstacle; or the appliance is located with
insufficient clearance at the sides, back and top
Temperature inside is too
cold
Increase the temperature by following the
«Display controls” chapter.
Doors cannot be closed
easily
Check whether the top of the refrigerator is tilted
back by
10-15mm to allow the doors to self close, or if
something inside is preventing the doors from
closing.
Water drips on the floor
The water pan (located at the rear bottom of the
cabinet) may not be properly leveled, or the draining
spout (located underneath the top of the
compressor depot) may not be properly positioned
to direct water into this pan, or the water spout is
blocked. You may need to pull the refrigerator away
from the wall to check the pan and spout.
The light is not working
•
The LED light may be damaged. Refer to replace
LED lights in cleaning and care chapter.
•
The control system has disabled the lights due to
the door being kept open for too long. Close and
reopens the door to reactivate the lights.
Troubleshooting
