12
16.
Connect electrical connector
①
in
accordance with step 3 and then
install part
②
(which is in the plastic
bag).
17.
Reverse part
①
by 180°and install it
onto the right corner of upper door,
then mount part
②
. (both of which
are taken down in step 2)
18.
Take the reed switch out of the
coping block(part
③
6 in step 3) and
mount it on another block for use
(marked “R” in the plastic bag). Place
the removed coping block back into
the plastic bag.
Note: Be sure character side of reed
switch fits well with coping block.
19.
Install part
①
connect the wire
connector
②
, and then install part
③
.
20.
Open the upper door, mount door racks
and then close it.
Installing your new appliance
Upper hinge cover (left)
