9
It may not work properly if left at a
temperature above or below the
indicated range for a long period of time.
Climate
class
Ambient
temperature
SN
+10°C to +32°C
N
+16°C to +32°C
ST
+16°C to +38°C
T
+16°C to +43°C
•
Place your appliance in a dry
place to avoid high moisture.
•
Keep the appliance out of direct
sunlight, rain or frost. Keep the
appliance away from heat sources
such as stoves, fires or heaters.
Leveling of appliance
•
For the appliance to be sufficiently
leveled, and the air to circulate
correctly in the lower rear section
of the appliance, the bottom feet
may need to be adjusted. You can
adjust them manually by hand or
by using a suitable spanner.
•
To allow the
doors to self-
close, tilt the
top backwards
by
about
10mm.
Installing the door handles
For the convenience of transportation,
the door handles are separately provided
in a plastic bag, you can install the door
handles as follows.
1.
Lever screw covers on the left side of
the door, and then put them back to
the plastic bag.
2.
Match the handle on the left side of
the door, keeping axes of screw holes
in the handle and the door in a line, as
shown in the following picture.
3.
Fix the handle with the special screws
provided in the plastic bag. And then
install the handle covers.
Reversing the door
The side at which the door opens can be
changed, from the right side (as
supplied) to the left side, if the
installation site requires.
Warning! When reversing the door, the
appliance must not be connected to the
mains. Ensure that the plug is removed
from the mains socket.
Tools you will need:
Note: Before you start, lay the
refrigerator on its back in order to gain
access to the base. You should rest it on
soft foam packaging or similar material to
avoid damaging the backboard of the
refrigerator. To reverse the door, the
following
steps
are
generally
recommended.
1.
Stand the refrigerator upright. Open
the upper door to take out all door
racks (to avoid damaging the rack)
and then close the door.
Installing your new appliance
8mm socket wrench
8mm socket wrench
Cross shaped screwdriver
Thin-blade screwdriver
8mm wrench
screwdriver
