10
2.
Lift part
①
from the top of the
refrigerator body from the right side
and then take down part
③
and part
④
of the upper door in the same way.
Take down part
②
and put it back into
the plastic bag.
3.
Disconnect electrical connector
①
as
well as electrical connector
②
and then
take down part
③
.
4.
Remove the screws
①
, loose wire
②
,
and remove par
③
.
Note: Please hold the upper door by
hand during step 4 to prevent the door
from dropping.
5.
Remove the upper door and place it
on a smooth surface with its panel
upwards. Lever part
①
and part
④
then loose screws
②
, as shown in
the picture. Change handle
③
to the
right side, then install screws
②
, part
①
and part
④
in turn. Loosen
screws
⑦
, detach part
⑥
and part
⑤
then install part
⑤
and another
part
⑥
(in the plastic bag)to the left
side with screws
⑦
. Put part
⑥
just
detached back to plastic bag.
6.
Loose screws used to fix the middle
hinge and remove middle hinge. Then
remove the lower door.
7.
Place the lower door on a smooth
surface with its panel upwards.
Change the handle to the right side
according to step 5. Loose screws
⑦
,
detach part
⑥
and part
⑦
.Turn part
⑤
by 180°and then install part
⑤
and part
⑥
to corresponding position
on left side together with screws
⑦
.
Installing your new appliance
Upper cover
Upper hinge cover (right)
Upper cover of upper door
Corner over
Special flange self-tapping
screws
part
Earth wire
Handle covers
Special self-tapping screws
Handle
Screw hde covers
Door holder
Stop block
Self-tapping screws
Door racks
