16
English
•
Then press the "SET" button once to configure the day. The day display starts
flashing. Select the desired day or days (in the block) using the "LEFT" and
"RIGHT" buttons. Press the "SET" button to confirm.
•
Then, you need to set the switching time. You can configure the desired hour
using the "LEFT" and "RIGHT" buttons. Confirm your entry using the "SET"
button. And then set the minutes using the "LEFT" and "RIGHT" buttons.
Once the desired time is set, confirm it using the "SET" button.
The connected device is now switched on at the first configured switching time.
To configure a switch-off time, repeat the steps described above. Make sure to
configure a "Switch off" program (e.g. 1_OFF).
To reset a timer that is already programmed, select the timer location using the
"LEFT" and "RIGHT" button and the ON / OFF time and press the "MANUAL" but
-
ton. The timer is then reset.
As an example, we will show you a program which switches the timer on every day
at 16:10 hrs and switches it off at 21:45 hrs.
10. Operating modes
The operation modes can not be changed during program settings. Press the
"MANUAL" button to switch between the four different modes.
The programs can be run in "AUTO ON" and "OFF AUTO" modes. In the "ON" or
"OFF" mode, all the programs are ignored and the timer does not work.
The various operating modes are described in the following table.
