18
English
Press the "CDT" button to start or stop the countdown. The maximum countdown
time is 23 hours, 59 minutes and 59 seconds.
The countdown function can only be used in the "AUTO ON/OFF" mode. Make sure
that the "Random function" is switched off during this time.
Once the countdown function is enabled, a symbol with the description "CD" ap
-
pears in the timer display. Press the "MANUAL" button to cancel the countdown
function while you are in the countdown function settings.
13. Daylight saving time function
To enable or disable the daylight saving time, press the "CLK" and "LEFT" buttons si
-
multaneously. An "S" symbol then appears in the display and the time is advanced
by one hour. If you want to enable winter time again, press the "CLK" and "LEFT"
buttons simultaneously. The "S" symbol disappears from the display and the time
is put back by an hour.
14. Priorities
Please note the following priorities when setting the timer.
• 1. "ON" or "OFF"
•
2. Random function
• 3. Countdown
• 4. Program
The timer gives the highest priority to the operating modes "ON" and "OFF". The
random function is at priority level two, the countdown function at priority level
three and the program function has the lowest priority. So, make sure that your
desired program uses the correct operating mode.
