background image

                                                  

MyChron Light TG  

Release 1.04 

1

Dear MyChron Light TG Owner 

 

Your new Instrument is the evolution of MyChron Light MCL. 

This new instrument merges all functionalities and values of 

MyChron Light MCL with the new graphic display and gives 

you a lot of new useful functions like histograms and 

different time counter settings. 

The small size of 

MyChron Light TG

 allows you to install it 

anywhere without problems. 

MyChron Light TG

 standard version is a plug and play 

instrument. There is nothing you need to do: only switch it 

on and it starts recording. Moreover, the automatic switch 

off after 20 minutes of inactivity avoid undesired battery 

exhaustion. 

Your pocket 

MyChron Light TG

 will be on your side in 

every race, exactly like AIM customer service, that is 

present at almost all major races throughout the country and 

every day from 9.00 am to 5.00 pm. 

For any doubt, information or question, please visit our 

website: 

www.aim-sportline.com

Thank you for your purchase of 

MyChron Light TG

 

Summary of Contents for MyChron Light TG





























Reviews: