INSTALLATION INSTRUCTIONS
equipped)
11.
Using a plastic trim removal tool, pry off rear seat
belt closeout.
12.
Using a plastic trim removal tool, remove rear
access panel to expose 10mm bolt, and remove bolt.
13.
Pull out subwoofer box slightly to gain access to run
Chassis Harness along existing harness
14.
Pull back the carpet and continue running Chassis
Harness forward.
15.
Run Chassis Harness under B-pillar cover to
passenger door sill. Use a plastic trim removal tool
to remove the (2) plastic push pins and remove
passenger sill plate/kick panel.
16.
Remove rubber bin insert from top of the dash.
17.
Remove 7mm bolt.
9002-8846 Instructions 9-17-19
Page 4 of 8
DM
