INSTALLATION INSTRUCTIONS
wheels. Use the Long Bracket for wheels with larger offsets
4.
Remove spare tire and slide (3) supplied Push Nuts
on the studs.
5.
Plug the Camera connector into the Chassis Harness
connector, and insert RCA connector end of supplied
Chassis Harness through the rear gate vent behind
tire carrier.
6.
Using a plastic trim removal tool, remove interior
panels on the inside of the rear gate.
7.
Pull the harness through the rear gate openings
8.
Use supplied Wire Ties to secure Chassis Harness to
existing harness.
9.
Use supplied Wire Ties to secure Chassis Harness to
fabric factory wire cover. CAUTION: Leave enough
slack to allow the gate to open fully.
10.
Use a T20 Torx bit to remove the subwoofer box. (If
9002-8846 Instructions 9-17-19
Page 3 of 8
DM
