703739-1 Revision D Spider Glazier 2200 Operator's Manual Issue Date: 2019-Jan-25
Page 16 of 27
e) Counterweight Installation
CAUTION!
Each counterweight weighs 50-53 lbs.
Wear Personal Protective Equipment while loading.
Step 1:
Lock Rear Gantry Caster Brakes.
Step 2:
Install slot in first counterweight over post in Rear
Gantry, as shown in Figure 12. Slide counterweight so
that the center post is toward one end of the slot.
Step 3:
Install slot in second counterweight over post. Slide
counterweight so that post is toward the opposite end
of the slot from the first counterweight, as shown in
Figure 13.
Step 4:
Continue to load counterweights, offsetting them from
one another to minimize pinch hazards.
Step 5:
Consult Table 1 on Page 22 for the correct number of
counterweights to use for each configuration.
Step 6:
Do NOT load counterweights higher than the top
of the Rear Gantry posts.
Maximum weight of
counterweights is approximately 2,420 lbs.
Figure 12: Counterweight Installation
Counterweight
Post
Post at One End of Slot
in Counterweight
Rear Gantry
Figure 13: Second Counterweight Offset from First
Counterweight
Post
Post at Other End of Slot
in Counterweight
Rear Gantry
