Rustler 6B Gray
BMRUS6BGRAY
31
CLEANING AND CARE
First Use
1. Light Barbecue per “Lighting” section.
2. Keep burners on and (HIGH) for 15 minutes.
3. Turn Barbecue off per “Turning Off” section.
4. Allow Barbecue to cool, but still be slightly warm.
5. Wipe off Barbecue surface, inner and outer walls with paper towels until clean.
Note: While drying you may notice the towel may have some discoloration. This is normal.
6. Apply finishing oil onto Barbecue surface, inner and outer walls and evenly coat with rolled up paper towels.
7. Repeat this process at least twice.
After Each Use
1. Turn Barbecue off per “Turning Off” section.
2. While the Barbecue is still warm, gently scrape off all food residue with a scraper.
3. Wipe down Barbecue surface, inner and outer walls with a towel or paper towels.
4. For stubborn food residue:
a. Light Barbecue per “Lighting” section.
b. Apply cooking oil onto Barbecue surface.
c. Allow oil to “boil” food residue off.
d. Repeat steps 1 through 3.
e. If necessary, use a BBQ stone and scrub the food residue off.
f. Continue with “Seasoning Barbecue” instructions.
5. Wipe off Barbecue surface, inner and outer walls with paper towels until clean.
Note: While drying you may notice the towel has some discoloration. This is normal.
6. Apply finishing oil onto Barbecue surface, inner and outer walls and evenly coat with rolled up paper towels.
7. Light Barbecue per “Lighting” section.
8. Keep burners on and (HIGH) for 15 minutes or until finishing oil starts to smoke.
9. Turn Barbecue off per “Turning Off” section.
10. Repeat steps 6-9 a minumum of 2 additional times.
11. Following “Before Storing” section.
Refurbish the Barbecue Surface
1. If Barbecue is off, light per “Lighting” section for 10 minutes. Then turn Barbecue off per “Turning Off” section.
2. If Barbecue is on, turn Barbecue off per “Turning Off” section.
3. While the Barbecue is still warm, use a scraper or metal spatula to remove as much rust and food residue as you
can from the Barbecue surface, inner and outer walls.
4. Apply a liberal amount of cooking oil onto the Barbecue surface.
5. Using a BBQ stone, scrub the Barbecue surface. Apply additional cooking oil as need.
6. Wipe off Barbecue surface, inner and outer walls with paper towels.
7. Repeat steps 3-5 until paper towels no longer show any rust.
8. Apply finishing oil onto Barbecue surface, inner and outer walls and evenly coat with rolled up paper towels.
9. Light Barbecue per “Lighting” section.
10. Keep burners on and (HIGH) for 15 minutes or until finishing oil starts to smoke.
11. Turn Barbecue off per “Turning Off” section.
12. Repeat steps 7-10 until the surface has a nice dark color.
13. Following “Before Storing” section.
