Brady Bradyprinter 200MVP, User Manual

Page: 12 / 110

2 Bradyprinter 200MVP and 300MVP User’s Guide
5HSRUWLQJ'DPDJH
If you discover shipping damage:
• Immediately notify the shipping company and file a damage report. Brady
Corporation is not responsible for any damage incurred during the shipment of the
equipment and will not repair this damage under warranty.
• Keep the carton and all packing material for inspection.
• Notify your local Brady distributor.
6WRUDJH
If you are not placing the printer into operation immediately, repackage it using the
original packing materials. The printer may be stored under the following conditions:
• Temperature: –40° F to 140° F (–40° C to 60° C)
• Relative humidity: 5% to 85%, non-condensing
0HGLDDQG5LEERQ5HTXLUHPHQWV
Since print quality is affected by media and ribbon, printing speeds, and printer
operating modes, it is very important to run tests for your applications.
• Continuous roll media, fanfold media, or card stock with optional perforations and
registration holes may be used.
• Printhead life may be reduced by the abrasion of exposed paper fibers when using
perforated media.
• The ribbon MUST be as wide as or wider than the media being used. If the ribbon
is narrower than the media, areas of the printhead are unprotected and subject to
premature wear. (When printing in direct thermal mode, ribbon is not used and
should not be loaded in the printer.)
All manuals and user guides at all-guides.com