Brady BBP31 User Manual Download Page 6

Page: 6 / 168

BBP™31 Sign & Label Printer User Guide

vii

Safety and Environment

Precautions

Safety and Environment

Please read and understand this manual before using the

BBP™31

Sign & Label

Printer

for the first time. This manual describes all of the main functions of the

BBP™31

printer.

Precautions

Before using the

BBP™31

printer, please note the following precautions:

•

Read all instructions carefully before operating the printer and prior to
performing any procedure.

•

Do not place the unit on an unstable surface or stand.

•

Do not place anything on top of the unit.

•

Keep the top clear of obstructions.

•

Always use the printer in a well ventilated area. Do not block the slots and
opening on the unit, which are provided for ventilation.

•

Only use the power source indicated on the rating label.

•

Use only the power cord that comes with the unit.

•

Do not place anything on the power cord.

Summary of Contents for BBP31








































































































































































Search results

Summary of Contents for BBP31

Reviews:

Related manuals for BBP31

Brands by name

Popular brands

Brady BBP31, User Manual

Search results

Summary of Contents for BBP31

Reviews:

Related manuals for BBP31

Brands by name

Popular brands