Brady BBP31 User Manual Download Page 113

Page: 113 / 168

BBP™31 Sign & Label Printer User Guide

Printer Maintenance

Cleaning the Printer

Cleaning the Printhead

Materials Required

•

BBP31 Cleaning Kit (Cat # B31-CCT)

•

Isopropyl Alcohol

To clean the printhead:

Remove power and media from the printer (see

Removing Power and Media

from Printer

on page 1).

Fill the plastic bottle from the cleaning kit with isopropyl alcohol.

Note:

Do not rub the swab over the bronze-colored area of the printhead.

Moisten one of the foam swabs from the cleaning kit with the alcohol and
gently rub across the green and black area of the printhead [13].

CAUTION!

Use only the materials supplied in the cleaning kit. Using other materials may
permanently damage the printhead.

Replace the ribbon and tape.

Close all covers and plug in the power cord.

Summary of Contents for BBP31








































































































































































Search results

Summary of Contents for BBP31

Reviews:

Related manuals for BBP31

Brands by name

Popular brands

Brady BBP31, User Manual

Search results

Summary of Contents for BBP31

Reviews:

Related manuals for BBP31

Brands by name

Popular brands