Brady BBP 30, User Manual

Page: 40 / 56

Printer Maintenance
BBP
®
30 User’s Manual 30 Rev A
Clean Printer and Keypad Residue
Whenever performing any maintenance on the printer, you should also clean any residue
caused by the media.
Materials Required
• Compressed Air Bottle, purchased locally (e.g., HOSA AIR-464 Gear Duster)
• Lint-free Cloth
• Isopropyl Alcohol
• Safety Glasses
To clean residue from the printer:
CAUTION CAUTION
Always wear safety glasses when using compressed air.
1.
Remove power and media from the printer (see page 27 ).
2.
With safety glasses on, spray compressed air on any parts of the printer that have built-up
residue.
Note:
If compressed air is not available, use a lint-free cloth lightly moistened
with isopropyl alcohol and wipe off residue.
3.
If necessary, use a moistened, lint-free cloth to clean the keypad.
4.
Replace the ribbon and tape.
5.
Close all covers and plug in the power cord.