Brady BBP 30, User Manual

Page: 24 / 56

Printer Set Up
BBP
®
30 User’s Manual 14 Rev A
Feeding and Cutting Label Stock
Use this procedure to advance the media to the cut position, and (optionally) cut the media.
Note:
For die-cut media, the media is advanced to the cut position which is the
next die-cut label. For continuous media, the media advances until you release the
Feed button.
To feed and cut the label stock:
1.
With printer power on, press and hold
Feed
until the length of media you want
exits the printer.
To cut the media:
2.
Press Menu to go to the navigation menu.
3.
Press

or

to scroll to Cut Media , then press . The media is cut.
10.
Close and latch the ribbon cover.
11.
Close the enclosure cover.
If printer was off, press . The system
detects the media and ribbon colors and
sets the amount of remaining supplies.