MF2944/BIR3
Installation
2
6/6/2014
Bradley •
215-1373 Rev. P; ECN 14-00-006
Pre-Installation Information
Terreon material
The Quadra-Fount is constructed of Terreon, a densified solid surface material composed of polyester resin . Terreon is
resistant to chemicals, stains, burns and impact . Surface damage can be easily repaired with everyday cleaners or fine-grit
abrasives . Terreon is NAHB certified to meet ANSI Z124 .3, Z124 .6 and ANSI/ICPA SS-1-2001 .
Infrared sensor and 6V DC solenoid valve
Each sprayhead is controlled by a 6V DC solenoid valve, allowing each user to activate a single flow of water . Each valve
uses less than half the maximum amount of hot water allowed by the ANSI/ASHRAE/IES 90A-1980 Standard .
Barrier-free and ADA compliant
The Terreon Quadra-Fount with infrared is designed to comply with all ADA and TAS guidelines on reaches, clearances and
operation
when mounted at standard height dimensions by the installer
.
Supplies Required by Installer
•
(6) 3/8" diameter bolts with washers and (6) wall anchors appropriate for your installation
•
(2) 3/8" diameter bolts with washers and (2) floor anchors appropriate for your installation
•
1/2" nominal copper tubing for hot and cold water supply lines
•
1-1/2" NPT drain trap and waste connection
•
Pipe sealant and plumber’s putty
