31
5. 7 CONTROLS
All controls are conveniently positioned next to
where the operator would stand when feeding the
machine to provide easy operation. Review this
section to familiarize yourself with the location and
function of each control before starting.
1.
Hydraulic Feed Control Lever:
This lever is positioned to extend around the feed
hopper and provides access from all sides. It is
only available when the chip- per is equipped with
the optional hydraulic feed hopper.
Pull the control all the way out to engage the
feeding system. Push in slightly to the first detent
to stop the feeding system. Push the control all
the way in to reverse the feeding system.
NOTE
Use the typical flow divider next to the control
valve to set the feeding spread.
Feeding
Neutral/Stop
Reversing
FIG. 20 HYDRAULIC FEED CONTROL LEVEL
