38
19. Shear Pin:
The PTO driveline is designed with a shear pin at the
input yoke to prevent overloading the drive system.
Remove the broken parts from the yoke when the pin
shears and replace with genuine BRABER EQUIP-
MENT parts. The drive system is designed to function
well without failing the shear pin. If it does fail, gener-
ally it is being fed too fast or something very hard has
been jammed into the rotor or between the blades.
Always unplug the system and determine the cause
of the problem and correct it before resuming work
WARNING
Machine is shown with guard
opened or rotor cover opened
for illustrative purposes only. Do
not operate machine with guard
opened or cover opened.
BE-WC32
BE-WC42
BE-WC62
FIG. 28 SHEAR PIN