Sistema de retención infantil
24
25
BW123
www.babyqs.com
A.
Group 2 vertical belt hook.
B.
Ergo seat cushion.
C.
Harness pads.
D.
Harness straps.
E.
Group 2 diagonal belt hook.
F.
Locking buckle.
G.
Buckle release-button.
H.
Locking buckle pad.
I.
Group 0 diagonal belt hook.
J.
Harness adjustment button.
K.
Harness adjuster strap.
L.
Child seat adjuster.
M.
Group 0 vertical belt hook.
N.
Group 2 diagonal belt hook.
O.
Harness straps pad connector.
P.
Harness strap slot.
Q.
Height regulator (15-36 Kg.).
R.
Childs´s seat base Group 0.
S.
Metal harness connector.
T.
Group 1 Locking clip.
2. SEAT PARTS AND FITTINGS
3. INSTALLING CHILD SEAT. GROUP 0+.
Only suitable for
group 0+
, approx.
0 to 15 months (0-13 Kg.)
WARNING
11.
Check that the buckle is properly fastened. It is important that
in the event of an emergency the child can be released quickly.
12.
Make sure the seat does not become caught by the vehicle´s
door or reclining seat. Likewise, check that the seat is properly
and sufficiently fitted.
13.
Never try to remove, change or add pieces to the seat or harness
since their basic and security functions may be seriously affected.
14.
Always fasten this safety seat into the vehicle with the seat belt,
even when not in use. Never leave your child unattended when
seated or not.
15.
Contact our Customer Service for any question about installing
this child safety seat: +34 943 833 013.
16.
Please keep this safety seat away from corrosive products.
17.
The manufacturer guarantees the quality of its products but not
the quality of second-hand products or those registered under
other trademarks.
1. USE IN VEHICLES
Correct installation /
proper
Incorrect installation /
improper
3-point lap and
diagonal seat belt
2-point lap seat belt
Only suitable for this
particular seat WHEN having
a lap and diagonal seat belt
(3 anchor points)
Optional installation
1.
From the base of the car seat, please change the
R
controller
from the base to the front position by turning it on its axis (3.1).
2.
Recline the seat as posible. To adjust the reclining position of the
child seat, pull the handle
L
forward until you reach the required
position
(3.2)
.
3.
Install the child seat rearward facing, making sure it is firmly
pressed against the vehicle seat backrest (3.3).
Do not use the child seat on a passenger seat fitted with an active
airbag.
Always check that the harness straps are suitable for the height of
your child. The shoulders of the child should always be just below
the back slots at a suitable height
Child restraint system
Group 1/2/3
