Putting into operation
17
Jelly Mini Boy - Digital Airmix Edition 12.08
4.6
Switching the Implement on/off
Switching on
- Press the green push switch (1).
If the green control lamp on the push
switch (1) lights up, the device is
switched on.
Dry running heater and agent-hose heat
up to the set processing temperature.
The Jelly Mini Boy is ready for operation
when the yellow (2) and the red signal
lamp (3) goes out. If the implement is
cold, the heating period will last approx.
5 to 8 minutes.
The heater and the fan of the heat box
(4) for the spray gun are turned on.
Excess pressure is generated inside the
storage tank, if the compressed air
supply is connected with the external
compressed air source. The excess
pressure fills the dry running heater and
agent-hose with agent from the storage
tank.
Switching off
- Press the green push switch again (1).
If the green control lamp on the push
switch (1) goes out, the device is
switched off.
Summary of Contents for Jelly Mini Boy Digital Airmix
Page 38: ...38 Circuit diagrams Jelly Mini Boy Digital Airmix Edition 12 08 7 Circuit diagrams...
Page 39: ...Circuit diagrams 39 Jelly Mini Boy Digital Airmix Edition 12 08...
Page 40: ...40 Circuit diagrams Jelly Mini Boy Digital Airmix Edition 12 08...
Page 41: ...Circuit diagrams 41 Jelly Mini Boy Digital Airmix Edition 12 08...
