Boya BY-WM8 Pro, User Manual

Page: 26 / 177

NOTE:
1. When you are setting the transmission channel, the transmitter cannot be used
to transmit signals.
2. Do not remove the batteries while setting the transmission channel.
3. Make sure that the selected channel is the same on the transmitters and receiver
being used in the same system.
For setting up the channel, VOL, STEREO and MONO for receiver, please follow the
below steps:
Set up Channel
1) Set up Channel A
- Press “SET” button of Receiver, the display section shows “CH-A”.
- Press the + (+ selection) button to increase the channel.
- Press the – (- selection) button to decrease the channel.
- Long press +/- buttons, the channel will increase and decrease automatically.
1) Set up Channel B
- Press “SET” button of Receiver, the display section shows “CH-B”
- Press the + (+ selection) button to increase the channel.
- Press the – (- selection) button to decrease the channel.
- Long press +/- buttons, the channel will increase and decrease automatically.