Connect the Positive Battery Cable Extension to the existing positive battery cable end with 6mm
hex head cap screw, flat washers and lock nut. Wrap thoroughly with Black Electrical Tape.
Connect the Positive Cable to the battery FIRST, then connect the Negative Cable to the battery.
Use the included zip ties to secure the cables to the sub frame and tidy up your work.
Turn on the ignition switch to check for proper connection. Check the lights or horn first.
Make certain the transmission is in neutral and test the starter.
Please Note: After or during your first test ride, check to see if the tire has rubbed the bottom of
the tray. If so, you may want to consider taller and/or stiffer rear shocks.
