Attach the LEFT and RIGHT fiberglass TRAY SUPPORTS to the sub frame with two 6mm button
head socket cap screws (1 per side), flat washers and lock nuts. Leave the nuts slightly loose.
Please note, you may need to ream the holes in the Tray Supports a little, due to variations
between the sub frames.
Set the fiberglass BATTERY TRAY onto the SUB FRAME SUPPORTS and attach with four 6mm
button head socket cap screws (2 per side), flat washers and lock nut. Leave the nut slightly
loose.
Refer to the photo for tray positioning and screw locations.
Once you are certain all holes are aligned and the tray is fitting properly, finish tightening all the
nuts.
