Locate these parts in your kit and lay them out in this manner. This is the layout in
which they will attach to your sub frame.
The item on the left is the LEFT TRAY SUPPORT, the item in the center is the BATTERY TRAY
and the item on the right is the RIGHT TRAY SUPPORT.
Typically, you will attach the LEFT and RIGHT TRAY SUPPORTS to the holes on each side of
the sub frame that are farthest to the back.
This early /5 sub frame does not have any holes. If this is the case, loosely fit the
Battery Tray and Tray Support assembly onto the sub frame. Position for best
fit, then drill one hole in each side for attachment.
