Page 29/30
August 2022
Bale wrapper | User manual
Transmission
Belt slippage
Belt tension is incorrect.
Adjust tension
Platform does not rotate
Belt tension is incorrect.
Adjust tension. Adjust belt
clutch tension on side of
motor.
Platform does not stop
Belt tension is incorrect.
Adjust tension. Adjust belt
clutch tension on side of
motor.
Controls
Before setting the number of
revolutions the automatic
stop device operates.
Sliding arm does not fully
lower to the set position.
The starting lever is
insufficiently stretched. Pull
the lever until the arm is
lowered.
The movement of the sliding
arm is not smooth
Dust or dirt has settled on the
sliding arm.
Remove dust or dirt and
apply oil.
Because the sliding arm is
covered with grease, the
movement is not smooth.
Remove dust or dirt and
apply oil.
The thread comes off the
bale.
Problem
Cause
Solution