Page 22/30
Bale wrapper | User manual
August 2022
5.
Starting operations of the machine wrapping
1.
Pull the start lever towards the side mark. The platform will rotate, and a part of the slider arm of the automatic
stop device will lower to the set position to wrap the foil.
CAUTION
DO NOT press the start lever toward the X symbol marked on the side. Damage or problems may occur.
Pull the start lever firmly until the slider arm part of the auto stop device is fully lowered to the set position to wind
the foil. unless the start lever is pulled far enough, the foil cannot be wound accurately.
2.
To stop the winding process: while pulling the start lever towards the side mark, raise the auto‐stop arm to
release it.
1
Starter lever
Do not push the lever in the opposite direction.
2
Pull lever
1
Starter lever
4
Extended side
2
Rod
5
Bolt
3
Arm