Shenzhen Bowei tech Co.ltd.
ADD:RM902;ShangMei Times;NO.57;LongGuan RD;Long Hua Dist Shenzhen, China;518000
Tel:86-755-29994192 13148703639
Email:[email protected] http://www.bowei-ch.com/
even in the room preventing UVA/UVB and keep along 3 to 6 months
because of the treatment skin sensitivity to the sunlight. Using suntan
lotion or umbrella preventing can improve the effect early.
6)
Period for laser treatment: According to the
different treatment parts and
7)
pigment dark or not, the treatment may be several
times. Normally one period of treatment is 1-2 times, every time at 20-30
days interval. If there is no special,every 2-4 weeks go to clinic check
again, if there is anything abnormally, please cure it early.
8)
Pigment fadeaway is a slow process, for the
pigmentation skin, normally it is 1-3 months. In order to get more favorable
effect, repeated treatment should be 1-3 months interval.
Maintenance:
1)
Notice to use purified water or de-ionized water,
not the mineral water or tap water.
2)
Be careful not to irradiate the machine avoiding
the surface of machine injured.
Common Questions and Fixing:
1)
No signal after power on. The reason is that the
power plug doesn‟t reach it,please directly connect the power plug.
2)
No signal after power on because of the fuse
blowing. Please replace the fuse with 5A/220V AC.
3)
No signal on the screen because that the
Crash-stop switch being pressed. Please lift the Emergency-stop switch
up.
4)
Touch-off light is off state pressing the button on
the screen when the machine is on pre-ignition. One reason is that the
Xenon Lamp is damaged need to replace a new one. Another reason is
that the life time for Xenon is full, change a new one.
5)
Water leaking out of machine, because of the
impact during on shipment
process. May in the tube joint. Please call the service people to deal with it.
6)
If you feel the energy is not big enough or the
curing treatment is not well enough, the reason maybe the temperature is
too higher or no water in the machine and damaged the body machine.
Please stop firstly, after half an hour starting the machine again.
