Shenzhen Bowei tech Co.ltd.
ADD:RM902;ShangMei Times;NO.57;LongGuan RD;Long Hua Dist Shenzhen, China;518000
Tel:86-755-29994192 13148703639
Email:[email protected] http://www.bowei-ch.com/
Laser Treatment Mode Selection Interface.
Laser parameter adjustment method and explanation:
1. Laser energy adjustment:
The adjustment scope of the laser energy is: 0-1500mJ to adjust its size
through the up and down arrows. If always press the adjustment button, laser
energy will automatically increase or decrease. The energy adjustment step
length is 10mJ for a single adjustment and 30mJ for the continuous adjustment.
The bigger the number is, the greater the laser output energy is, which could
adjust according to the actual situation.
2. Laser working frequency adjustment:
The laser working frequency scope is: 1 - 6 Hz to adjust its size through the up
and down arrows.If always press the adjustment button, the laser working
frequency will automatically increase or decrease. The adjustment step length
of the laser working frequency is: 1 Hz. The bigger the number is, the faster the
bright dipping is, which could adjust according to the actual situation.
3 Status prompt:
The current temperature:
The icon
represents the current temperature of the cycling water in the
system. If the current temperature exceeds that set in the temperature
protection item at the backstage. This icon will flicker and give off the alarm
sound. At this time, all the keys on the screen could not be used.
