19
Replacing the Walking Belt
!
To reduce the risk of electrical shock or unsupervised usage of the equipment, always remove the batteries from the machine and wait 5 minutes
before cleaning, maintaining or repairing the machine.
Tools Required: Short #2 Phillips screwdriver, #2 Phillips Screwdriver, 5 mm hex wrench, 6 mm hex wrench , (2) 13 mm (1/2”) wrench, 16 mm wrench, 18 mm wrench,
19 mm wrench
1. Remove the 4 indicated screws from the Front Cover using a short #2 Phillips
Screwdriver and a standard #2 Phillips Screwdriver.
2. Remove the Front Cover.
3. Using a #2 Phillips screwdriver, remove the 4 indicated screws from the Rear
Cover and remove it.
4. Using a #2 Phillips screwdriver, remove the 5 indicated screws from the Left and
Right Pivot Covers.
