15
5. Using a #2 Phillips screwdriver, remove the 5 screws from the Right Side Cover
and remove it.
6. Using a 16 mm wrench, loosen the Belt Tensioner Bolt until the Drive Belt has
slack.
Note:
Count Belt Tensioner Bolt threads before loosening.
7. Turn the Drive Pulley clockwise while forcing the Drive Belt to the outside. Belt
will come off of the Drive Pulley and Rear Roller Pulley.
Keep fingers out of any pinch opportunities when turning the Pulleys.
Note:
Chain guard is not shown in images.
8. Loosen the Belt Tensioning Screws and Brackets using a 5 mm hex wrench.
NOTE:
Be sure to record how many turns it takes to remove the screws to assist
with reassembly.
9. With the Walking Belt loose, shift the belt to the outside and remove the 4 deck
screws using a #2 Phillips screwdriver.
NOTE:
Be sure to record how many turns it takes to remove the screws to assist
with reassembly.
Drive Pulley
Belt Tensioner
Bolt
Rear Roller
Pulley
