STEP 4
Insert head of main beam into the opening of the Rail Attachment Bracket. See 4A
Secure main beam to rail attachment bracket by inserting and tightening the 1" threaded knob. Do not
over tighten.
Next, insert one 4 1/4" hex head bolt and through the aligned holes at the side of the rail attachment bracket
and main beam. Secure with a washer and a 3/8" lock nut and tighten with a 9/16" wrench. See 4B
STEP 3.
Locate your Main Beam. (Long Box) This is the longest beam.
(The head has a threaded hole on each side. You should also see
a caution sticker located on the face of the beam which faces towards
the ceiling.)
Locate Rear Legs and attach to the bottom of the main beam with two tap
bolts and 3/8" washers. Tighten with 9/16" wrench. See 3A
Main Beam
Rear Legs
3A
Rear of Main Beam
Secure legs to beam with
two tap bolts
or
4B
Threaded Knob
Motivator
Rail Attachment Bracket
Head of Main Beam
4A
Head of Main Beam
(Threaded Holes)
Caution Sticker
Summary of Contents for Motivator
Page 7: ......
