STEP 1.
Have the appropriate bolts ready for the
appropriate parts.
Locate Base Frame and Pulley Frame.
(Square box)
Attach pulley frame to base frame with four
3/8"x1" tap bolts and four 3/8" flat washers,
tighten with a 9/16" wrench. See 1A.
Note: Leave pulleys and cables wrapped
until assembly is complete.
1A
Pulley Frame
Base Frame
STEP 2.
Locate Lower Mast. (Square box)
Align lower mast against the face of the pulley frame.
As pictured in 2A.
Align holes in lower mast with holes in base frame.
Secure the center of the lower mast to the pulley
frame with the 6" carriage bolt, 3/8" washer and
a 3/8" lock nut.
IMPORTANT Hand tighten lock nut until both
Hex Head bolts are in place below then tighten with
9/16" wrench. See 2A.
Insert two 4 1/2" hex head bolts, two 3/8" washers.
Secure with two 3/8" nylon lock nuts. Tighten with
9/16" wrench. See 2B
Lower Mast
Motivator
2B
Motivator
2A
Secure Lower Mast to pulley
frame with 6" Carriage Bolt.
Two 4 1/2" Hex Head Bolts.
After securing 4 1/2" bolts below,
tighten nylon lock nut of carriage
bolt with a 9/16" wrench.
Summary of Contents for Motivator
Page 7: ......
