Assembly / Owner’s Manual
45
Troubleshooting
Condition/Problem
Things to Check
Solution
No display/partial display/unit
will not turn on
Console in sleep mode
Push the Resistance Level Knob or move handlebars to wake up Console.
Check electrical (wall) outlet
Make sure unit is plugged into a functioning wall outlet.
Check connection at front of unit Connection should be secure and undamaged. Replace adapter or
connection at unit if either are damaged.
Check Status LED and Status
LED Ring
If Status LED and Status LED Ring are:
- on (solid), then the Console is starting up. May take up to 3 minutes.
- briefly turns off every 2 seconds, then the battery is initial charging for 60
minutes
- blinking quickly, then Console is experiencing an error. Restart machine.
Check data cable
connections/orientation
Be sure cable is connected securely and oriented properly. Small latch on
connector should line up and snap into place.
Check data cable integrity
All wires in cable should be intact. If any are visibly crimped or cut, replace
cable.
Check console display for
damage
Check for visual sign that console display is cracked or otherwise damaged.
Replace Console if damaged.
AC Adapter
Check for visual sign that AC Adapter is cracked or otherwise damaged.
Replace AC Adapter if damaged.
If the above steps do not resolve the problem, contact Customer Service (if
inside US/Canada) or your local distributor (if outside US/Canada).
Console display will not turn off Console
Push the outer button on the back of the Console to de-activate the display.
Note:
The outer button MUST be pushed to turn on the Console display..
No response on Console
when Resistance Level Knob
is pushed or rotated/ screen
touched
Resistance Level Knob
Push and rotate the Resistance Level Knob to see if Console responds.
Check data cable integrity from
Console Button Assembly to
Console
All wires in cable should be intact. If any are visibly crimped or cut, replace
cable.
Check data cable
connections/orientation
Be sure cable is connected securely and oriented properly. Small latch on
connector should line up and snap into place.
Check Console display for
damage
Check for visual sign that console display is cracked or otherwise damaged.
Replace Console if damaged.
If the above steps do not resolve the problem, contact Customer Service (if
inside US/Canada) or your local distributor (if outside US/Canada).
No speed/RPM reading/
Console shuts off (enters sleep
mode) while in use
Check data cable integrity
All wires in cable should be intact. If any are cut or crimped, replace cable.
Check data cable
connections/orientation
Be sure cable is connected securely and oriented properly. Small latch on
connector should line up and snap into place.
Check magnet position (requires
shroud removal)
Magnet should be in place on pulley.
Check Speed Sensor (requires
shroud removal)
Speed sensor should be aligned with magnet and connected to data cable.
Realign sensor if necessary. Replace if there is any damage to the sensor or
the connecting wire.
Check Motor Control Board
(MCB) connections
Be sure all cables are connected securely and oriented properly to MCB.
If tests reveal no other issues, contact Customer Service (if inside US/
Canada) or your local distributor (if outside US/Canada).
Summary of Contents for MAX TRAINER MAX TOTAL
