User’s Manual
22
To dismount your fi tness machine:
1. Move the Pedal you want to dismount from to the highest position, and bring the machine to a complete stop.
This machine is not equipped with a free-wheel. Pedal speed should be reduced in a controlled manner.
2. Grasp the Static Handlebars under the Console to steady yourself.
3. With your weight on the lowest foot, swing the upper foot off the machine and down onto the fl oor
.
4. Step off of the machine and release your grip from the Static Handlebars.
Getting Started
1. Place the fi tness machine in your workout area.
Place the machine on a clean, hard, level surface, free from unwanted material or other objects that may hamper your ability to
move freely. A rubber mat can be used below the machine to prevent the release of static electricity and protect your fl ooring.
The machine can be moved by one or more persons. Make sure that your own physical strength is capable of safely moving the
machine.
2. Examine for any objects below the Pedals and in the Air Resistance Fan. Be sure it is clear.
3. Connect the power cord to the machine and into a grounded AC Wall Outlet.
4. If you use a Heart Rate Monitor, follow the Heart Rate Monitor directions.
5. To mount the machine, move the Pedals until the one nearest you is in the lowest position.
Care should be used when mounting or dismounting the machine.
Be aware that the Pedals and the Handlebars are connected and when either of these parts move the other does as well. In order to
avoid possible serious injury, grasp the Static Handlebars to steady yourself.
6. Grasp the Static Handlebars under the Console Button Assembly.
7. Steadying yourself with the Static Handlebars, step up onto the lowest Pedal and place your other foot onto the opposite Pedal.
Note:
“Bottomed out” is when the User is unable to start a workout because the Pedals will not move. If this occurs, safely grasp the Static
Handlebars and apply your weight to the heel of the higher foot. While still grasping the Static Handlebar, lean back slightly applying
more weight onto the heel. Once the Pedals begin to move, resume your intended workout.
8. Push the USER button to select the desired User Profi le.
9. Push and hold the USER button to edit the User Profi le.
10. The Console will display the Units value. Use the Increase/Decrease buttons to adjust the
Units value, and push the ENTER/START button to set the value.
11. The Console will display the Weight value for the User Profi le. Use the Increase and Decrease
buttons to adjust the weight value, and push the ENTER/START button to set the value.
Note:
Be sure to program your User Profi le (see the Edit a User Profi le section) before
starting a workout. The suggested Target Burn Rates are based on your User Profi le
settings.
12. Push the Max 14 Minute Interval button to begin a Quick Start workout. Allow time to become
familiar with how your Bowfl ex™ Max Trainer™ machine operates and responds to adjust-
ments of Resistance Level and rpm.
Note:
When operating the Bowfl ex™ Max Trainer™ machine, be sure the Legs are moving in
the direction as shown on the Crank Cover.
