introduction
Accurate, ergonomic and robust, the Creo
generator and Creo flash head have been designed
by working closely with photographers to develop
a system that meets the exacting high standards
demanded in professional studios while remaining
simple and intuitive to use.
For more information about these products and to
find details of your nearest Bowens dealer, please
visit the Bowens website - www.bowens.co.uk
In order to obtain the full benefit from your purchase,
please take a few moments to familiarise yourself
with this user manual.
safety notes
always
• Switch turn power OFF before before fitting or
removing any flash heads.
• Avoid placing cables where they can be tripped
over. Protect from heavy, sharp or hot objects,
which may cause damage and replace damaged
cables immediately.
• Have the unit serviced / repaired by an authorised
Bowens service centre.
• Always remove the power cord by gripping the
plug. NEVER pull the cord.
• Always ensure that any extension cord used has
a suitable current rating to prevent overheating
and never use a coiled extension cord.
never
• Use in an environment where moisture or
flammable vapour is likely to come into contact
with the unit.
• Use a unit with damaged housing or mouldings.
If the unit is dropped or damaged in any way
always have it checked before using.
3
- Cr
eo |
intr
oduction and safety notes
Summary of Contents for CREO 1200
Page 1: ...Owner s Handbook...