Bowa ARC PLUS, Operating Manual

Page: 38 / 46

8 Maintenance and Repair
38 ARC PLUS Operating Manual 900-001_IFU_V1.0_11270-S0-20130118-EN
8.2. Repairs
NOTE
The ARC PLUS may be damaged if you attempt to do your own repairs or
modifications.
 If a repair is necessary, always have it done by the service centre specified
below.

Never carry out any repairs yourself.
BOWA accepts liable for the safety, reliability and performance of the argon device
only under the following conditions:

Full compliance with all instructions regarding the installation and
proper use for the intended purpose contained in this operating manual.

Changes, repairs, new settings and the like are performed only by
persons authorised by BOWA to do this work.

The electrical distribution system in the relevant room complies with
local regulations and statutory provisions.
Maintenance of the device is necessary whenever a fault indication and/or
malfunction occurs. Before returning the device, contact a BOWA field service
employee or an authorised dealer. The following information is required for
returning the device:
Prompt and satisfactory repairs can only be performed when all required data has
been supplied in full.

Complete address

Model number

Serial number

Software version

Describe the problem, the application concerned and the accessories used.
or

Describe the repairs to be made.
On a case by case basis, it must be agreed whether remote diagnosis is possible
or returning the device, possibly with temporary replacement by a loaner device, is
necessary.