12
Install Guide - SleekWall
FAQS
FREQUENTLY ASKED
QUESTIONS
CAN THIS BE USED FOR
POOL
FENCING?
Yes, however, the wall needs to be a minimum of
1200mm high.
https://www.building.govt.nz/buildingcode-
compliance/f9-safety-of-users/poolsafety/
WHAT IS THE BEST METHOD TO CUT
ALUMINIUM?
For best results, use a drop saw with an
aluminium cutting blade, this will create a
nice, clean, square cut. A grinder is acceptable
providing you use a thin metal cutting blade to
reduce the risk of burning the powder-coating.
CAN THIS BE INSTALLED IN
COASTAL
AREAS?
Yes, we have a 10 year warranty on our products.
If you are in a coastal zone then an increase of
cleaning and maintenance will be required.
We do not recommend the product to be in
direct contact with salt water.
CAN THIS BE USED FOR A
BALUSTRADE?
No, currently this has not been tested for
balustrade purposes.
WHAT DO I DO IF I HAVE
‘HARD
WATER’?
Regular cleaning of your fence will be required
to help prevent water spots from appearing.
Hard water is corrosive to the powder-coating,
therefore neglect will cause deterioration to your
fence.
HOW DO I SET UP MY
POSTS AROUND
ANGLES?
You will need to use two posts for this, the
channel system is required to be square to the
posts and palings, this can only be done with two
posts side by side.
