Boston Whaler 330 Outrage 2023, Owner'S Manual

Page: 102 / 189

3-27
Section 3 • Systems Overview & Operation
330 Outrage
R
WINDLASS
ANCHOR LANYARD
CLEAT
RODE
EMERGENCY HANDLE
FRESH WATER CONNECTION
POWER CONNECTOR FOR REMOTE CONTROL
WINDLASS REMOTE CONTROL
The anchor windlass is located in the bow locker. The
windlass gives you a mechanical means of raising
and lowering the anchor.
The anchor windlass is controlled by a power switch
and a control switch located on the helm switch
panel. The “WNDLS” switch (See figure 3.27.2)
controls power to the windlass. The control switch
is a momentary type switch which means that there
must be constant pressure applied to the switch to
operate the anchor windlass.
A hand-held remote located in the anchor locker
can be used for raising and lowering the anchor at
the bow. When not in use, the remote can be stored
in a box located on the starboard side of the anchor
locker. The power source for the remote is located
on the aft bulkhead of the anchor locker.
There is also a handle that can be used to raise and
lower the anchor manually in case the power to the
anchor windlass is lost.
Windlass
Fig. 3.27.1
1
2
3
4
5
6
7
8
Operation
A safety lanyard secures the anchor when stowed and
the boat is underway.
LOWERING - Pushing the top part of the switch
down will power the anchor windlass DOWN. Make
certain that the safety lanyard is detached from the
chain and is clear of any moving parts of the anchor
windlass.
RAISING
- Pushing the lower part of the switch will
power the anchor windlass UP. Once the anchor and
rode is secure in the UP position, the safety lanyard
can be re-attached to the rode.
EMERGENCY OPERATION
- The emergency
handle can be used in case the power to the anchor
windlass is lost. The top of the anchor windlass has a
socket receiver that mates up with the handle socket.
Windlass Switch Panel
Fig. 3.27.2
WINDLASS ON/OFF SWITCH
WINDLASS UP/DOWN SWITCH
1
2
AVOID PROPERTY DAMAGE
!
CAUTION
ENGAGE GYPSY LOCK AND ENSURE
ANCHOR IS SECURED WITH LANYARD
BEFORE GETTING UNDERWAY.
MRP# PN#
1
2
1
2
3
4
5
6
7
8
Anchor Windlass
Use the windlass switch on the helm whenever
possible. Use care when operating the anchor
windlass with the hand-held remote.
!
DANGER
The anchor windlass is located in the bow locker. The
windlass gives you a mechanical means of raising
and lowering the anchor.
The anchor windlass is controlled by a power switch
and a control switch located on the helm switch panel.
The “WNDLS” switch (See figure 3.27.2).