Boston Whaler 280 Outrage, Owner'S Manual

Page: 155 / 161

5-8
Section 5 • Care & Maintenance
R
280 Outrage
Protecting your engine’s vital moving parts from
corrosion and rust caused by freezing of trapped
water or excessive condensation due to climatic
changes is very important. Freezing water in the
engine can cause extensive damage to the internal
moving parts. Internal engine parts can also be
affected by rust due to lack of proper lubrication
Use commercially available glass cleaners or a
mixture of fresh water and vinegar to clean your
glass windows, windshield or portlights. Dry with a
soft terry cloth towel or chamois.
Cleaning Tempered Glass Windshield
NOTICE
DO NOT USE abrasives, harsh chemicals or
metal scrapers on glass.
NOTICE
For windshields with aluminum frames refer to
“Aluminum Care” in this section.
Long Term Storage & Winterization
Long periods of storage, winter lay-up and/or non-
use, common to boats, create unique problems. When
preparing to store a boat for extended periods of two
months or more it is best to make sure that the boat
and its systems are properly conditioned for such
extended periods of non-usage.
The guidelines presented on the following pages
give basic instructions on “winterizing” your boat
and boat systems. If inexperienced with the process
of winterization it is best to hire the services of a
professional.
In addition, always consult the owner’s manuals of
the various systems and equipment on your boat for
the manufacturer’s recommendations on winterizing
and long term storage.
Never start or run your outboard (even
momentarily) without having water circulating
through the cooling water intake holes in the
gear case. This will prevent damage to the
water pump (running dry) or overheating of
the engine.
!
CAUTION
Engine
This should be done frequently to
avoid build up of salt water, dirt and
other environmental contaminants.
• Using a soft non-abrasive cloth, wash windows
inside and out with a mild soap (Woolite,
Joy, Palmolive, etc.) and water solution.
Rinse completely with cool water.
DO NOT USE DETERGENTS.
• Use separate clean, soft cloths or sponges for
application of cleaners and polishes (Use the
manufacturer’s recommended products).
• Use a small amount of cleaner or streaking may
occur.
If you get streaking or a leftover film, follow up
the application with a water rinse.
• Dry with a soft cloth or chamois to
prevent water spots. Polish with
a separate cloth.
• Don’t leave cleaners on for long periods;
wash immediately.
• Don’t apply cleaners in direct sunlight or at
elevated temperatures.
• Don’t use scrapers, squeegees, razors,
brushes, or towels.
Using a soft non-abrasive cloth, wash the vinyl
curtains inside and out with mild soap and water
mixture. RINSE COMPLETELY with cool water.
To minimize fine or hairline scratches apply a mild
automotive polish (i.e. Johnson’s Paste Wax) and
remove with a soft, clean cloth. DO NOT USE
ABRASIVE PLASTIC POLISHES.