4-4
170 Montauk
Section 4 • Electrical System
R
R E F E R T O T H E T R O L L I N G M O T O R
MANUFACTURER’S MANUAL IN YOUR OWNER’S
MANUAL PACKET FOR COMPLETE INSTRUCTIONS,
INFORMATION AND WARRANTY.
There is a risk of electrical shock. Always
have a qualified marine electrician install any
system upgrades that are not already installed
on your boat. There are a variety of wiring
configurations up to 36Volts. Incorrect wiring
will adversely affect your trolling motors
performance. Always use the correct circuit
protection and wire gauge when installing an
upgraded trolling motor wiring system.
!
WARNING
The system is protected by a 50 amp breaker located
on the forward wall of the console interior (Figure
4.4.1).
In the event a breaker trips, determine the cause and
correct the problem before resetting the breaker. A
breaker which trips repeatedly should be examined
by a qualified electrician to determine and correct
the cause of the trip.
Trolling Motor Breaker
Fig. 4.4.1
DC MAIN
BILG
E
ELEC. MAIN
1
BREAKER ...................................50 AMP
Trolling Motor (Option)
Your trolling motor manual will have location and
connection instructions for the motor wiring. Read
and understand the manual before proceeding to
connect the extension cord to your motor and your
boat’s electrical systems.
Summary of Contents for 170 Montauk
