2-1
170 Montauk
Section 2 • General Information
R
All boats must comply with federal regulations
regarding maximum capacities. The certification
plate (See figure 2.2.1) located on the control console
indicates the maximum weight, number of persons,
and horsepower your boat is rated to handle.
Manufacturer’s Certification
Boston Whaler
®
is dedicated to creating a superior
product which will provide comfort, performance,
safety and dependability. All of our boats comply
with the safety standards set by the United States
Coast Guard and are designed, engineered and manu-
factured in accordance with applicable recommenda-
tions and guidelines of the American Boat and Yacht
Council (A.B.Y.C.) and certified by the National
Marine Manufacturers Association (N.M.M.A.).
Construction Standards
Our Hull
2
3
NO AIR VOIDS
HIGH DENSITY CLOSED CELL
NON-ABSORBENT FOAM
HIGH QUALITY RESINS AND GELCOATS
WOVEN GLASS MATTING
Boston Whaler
®
hulls are constructed with our
patented Unibond™ construction process. This
involves foam injection into a closed mold system
where the foam expands to fill all voids in the hull.
When the finished product is pulled from the mold,
the hull and deck are chemically bonded to form a
solid, inseparable unit.
Hull Construction
Fig. 2.1.1
Hull Identification Number
The “Hull Identification Number” is located on the
starboard side of the transom.
This is the most important identifying factor and
must be included in all correspondence related to
your vessel.
Also of vital importance are the engine
serial numbers, part numbers, etc. when writing about
or ordering parts for your engine.
Record your HIN here:
Hull Identification Number (HIN)
Fig. 2.1.2
When your Whaler requires service or maintenance
work, it should be taken to an authorized Boston
Whaler
®
dealer.
To find a Boston Whaler
®
dealer in your area call:
1-800-942-5379
(Domestic/International).
In the unlikely event that a problem is not handled
to your satisfaction, discuss any warranty related
problems directly with the service manager of the
dealership or your sales person. Give the dealership
an opportunity to help the service department resolve
the matter for you.
Servicing Your Boston Whaler
1
4
1
2
3
4
Summary of Contents for 170 Montauk
