3-8
170 Montauk
Section 3 • Systems & Components Overview & Operation
R
UP
DN
UP
DN
UP
DN
UP
DN
Stopping the Engine
• Be sure that the gear
shift and throttle
control handle is
in the NEUTRAL
position
• Turn Key to the “OFF”
position.
• Turn the battery switch
“OFF”.
REFER TO THE ENGINE MANUFACTURER’S
MANUAL IN YOUR OWNER’S MANUAL PACKET FOR
COMPLETE INSTRUCTIONS.
O
FF
ACC
ON STA
RT
!
CAUTION
NEVER turn the battery switch to the “OFF”
position while the engine is running. Equipment
damage will occur.
Warming Up the Engine
The “THROTTLE ONLY” button on the gear shift/
throttle control allows the operator to increase engine
RPM for warm-up without shifting the engines into
gear.
• Be sure that the gear
shift and throttle
control handle is in the
NEUTRAL position.
• Press and hold the
“THROTTLE ONLY“
button while moving
the control handle
ahead to the forward
position.
• Advance the control
handle to increase
engine RPM.
NOTE
: Engine RPM is limited to prevent engine
damage.
• To disengage, return the
control handle back
to the neutral position.
The warm-up mode can be re-activated by turning
the engine off and re-starting.
OFF
ON
UP
DN
Summary of Contents for 170 Montauk
