Boston Whaler 170 Montauk, Owner'S Manual

Page: 50 / 103

2-7
170 Montauk
Section 2 • General Information
R
Through Hull Fittings
Fig. 2.7.1
1
2
3
FORWARD FISHBOX DRAIN
ANCHOR LOCKER DRAIN
MOTORWELL DRAIN (2)
BILGE PUMP DISCHARGE
HIGH WATER BILGE PUMP DISCHARGE
LIVEWELL INTAKE SEACOCK (OPTION)
GARBOARD DRAIN
SUMP DRAIN PLUG
REVERSIBLE PILOT SEAT W/LIVEWELL
DRAIN (OPTION)
Location of Thru-Hull Fittings
NOTICE
• Depending on the type of boat you have, you may have underwater fittings. Any fitting that will be
underwater needs to be plugged or the seacock needs to be closed.
• Through hull fittings and deck drain scupper flaps should be checked for proper seal annually.
When the boat is in the water the underwater fittings can be checked for dripping. It is recommended that
the underwater fittings be removed, cleaned and resealed every other year.
• If the through hull fittings need to be replaced, it is recommended that an authorized Boston
Whaler
®
dealer perform this type of repair. Through hull fittings that are improperly installed
can cause premature hull failure and may void the Boston Whaler
®
limited warranty.
4
NOTICE
A standard 1” “Snap-Tite” plug can be used to replace the drain plugs in your boat. It is recommended
that you carry spare plugs to be used in the event that the drain plugs issued with your boat become
lost or damaged.
5
1
2
3
5
4
6
7
9
6
7
8
8
9