Boston Acoustics Avidea 610, Instruction Manual

Page: 16 / 60

9
16
ENGLISH
Set Up Functions
Preparation for Set Up
Set Up Menu
Press the OPEN/CLOSE button on the unit
to open the tray. When the tray is open, press
the STOP button on the top panel of the unit
and press the SUBTITLE button on the
remote.
MULTI ( NTSC/PAL switchable)
NTSC
PAL
The SETUP functions are the following diverse functions. Please change them according to your use environment.
Turn on the POWER. 1 2
3
2
1
+
This model has a rear panel power switch.
If unit appears not to function make sure
AC cord is plugged in and rear panel power
switch is turned on.
Note
Set the TV Format according to the connected TV type.
(Initial Settings)
MAIN UNIT REMOTE
MAIN UNIT REMOTE
GENERAL SETUP
Picture Mode This adjusts the screen quality
according to the material being played back.
Auto The picture quality is adjusted automatically.
Film Choose this setting to reproduce the picture
quality of FILM material.
Video Choose this setting to reproduce the picture
quality of VIDEO material.
Smart Choose this setting to reproduce progressive
and interlaced materials with limited motion.
Super Smart Choose this setting to reproduce
progressive and interlaced materials with motion
(motion adaptive interlacing.)
Angle Mark When this is set to ON, the ANGLE
mark will be displayed when a multi angle scene
is reached during playback of a DVD.
On
Off
OSD Language This switches the language for the
on-screen display.
English, French, German, Italian, Spanish
Captions (NTSC ONLY) This switches the CLOSED
CAPTION ON or OFF. “Closed caption” is a subtitle
display system developed for the hearing-impaired,
but it is also a very effective system for learning
foreign languages. When your TV is compatible with
“closed caption” and you select ON, you can use the
CLOSED CAPTION function.
On
Off
Screen Saver This switches the screen saver ON or
OFF. When SCR SAVER is ON, the screen saver
function will operate after approx. 3 minutes have
passed with a still picture (display of BOSTON).
On, Off
SPEAKER
Downmix
The digital output will automatically provide
a stereo downmix in case a multichannel signal is detected.
On
Off
Allows Surround Sound to operate.
Center Allows you to turn off the Center channel.
On
Off
Rear Allows you to turn off the Rear channel.
On
Off
Subwoofer
Allows you to turn off the Subwoofer.
On
Off
AUDIO
Audio Out
Off
Bit Stream
A signal(DTS, DD or PCM) that is
compressed and changed into digital format.
PCM PCM (Pulse Code Modulation) is the most
common system of encoding digital audio.
Sound can be turned into digital audio data at
different sampling rates; the higher the rate, the
better the quality. PCM soundtracks are mono
or stereo only.
Compression
(ONLY FOR Dolby Digital Sources only)
Setting the dynamic range to levels below full will
provide a limited soft to loud range that maybe desirable
for late night listening
Full (Most Compression)
3/4
1/2
1/8 (Least Compression)
Off
LPCM Output LPCM is a signal that is changed to a digital
format without compression. A CD is recorded with 16-
bit sound at 44.1kHz, while DVD recording is anywhere
between 16 bits at 48kHz to 24 bits at 192kHz.
LPCM 48k
LPCM 96k
DOLBY Pro Logic II Mode
This mode applies conventional
2-channel signals such as digital pcm or analog as well as
Dolby Surround signals to surround processing.
Music This mode allows you to further enhance