TROUBLESHOOTING
Technical Data:
Please look for the technical data in the table marked ? at the end of this manual.
A
Length mm.
K
Air consumption per shot @ 5.6 Bar
B
Height mm.
L
Activation type
C
Width mm.
M
Summer lubricant
D
Weight Kg.
N
Winter lubricant
E
Noise L
PA
, 1s, d
O
O-ring lubricant
F
Noise L
WA
, 1s, d
P
Fastener Name
G
Noise L
PA
, 1s, 1m
Q
Dimensions mm.
H
Vibration m/s
2
R
Head/crown
I
P max Bar
S
Magazine capacity
J
P min Bar
T
New Driver Length mm.
U
Max. Depth Inside Piston mm.
PROBLEM
CAUSES
REMEDIES
Serious air leaking from valve
holes
Lower O-ring and trigger valve worn out or not in position.
O-ring plug of piston rod
O-ring valves worn out
Plug loose
Replace
Replace
Replace
Tighten
Air leaking from hole under
cylinder bridge
O-ring piston worn out
Replace
Does not drive staple but jaw
closes
Small valve dirty
Exhaust pinhole plunger or too tight
Rod hole outside of tolerance limits
Insufficient lubrication
Lubricate
Clean pinhole and outer diaphragm
Return within tolerance limits (0.75)
Lubricate
Air leaking from valve holes
O-ring piston valve not completely closed
Replace inner piston valve O-ring and
lubricate.
Staples are not completely closed
Jaw fall block is bent or damaged
Replace block
Jaw does not return
Bridge is not squared up
Square up
Slow operations
Lack of lubrication
Rod hole outside tolerance levels
Lubricate
Return within tolerance limits (0.75)
Staples jam
Driver worn out
De-jamming block springs slack.
Replace
Replace
FT70421-c-1110_Plier_Manual:70421_ATRO New Plier_AW 13/4/11 07:44 Page 6
